Mixing & Demolding GuidesStep-by-step workflows for optimal mixing, pouring, and curing.
Daily Craft Casting Powder: Casting in 5 Easy Steps
1. GEAR UP (SAFETY FIRST) – This is a high-strength composite. Always work in a well-ventilated area. Wear a dust mask to avoid inhaling fine particles and use standard crafting gloves (optional).
2. THE PERFECT RATIO – Always measure by weight & not by volume. Use a digital scale. – Standard Mix: 100g Powder to 40ml – 50ml Water. If you don’t have a digital scale, measure it by 2:1 (2 cups powder & 1 cup water.) (Pro-Tip: Add a few drops of water if you need a thinner flow, but do not overwater or you will ruin the structural strength).
3. MIX LIKE A PRO – Always add the powder into the water (not water into powder). Rest it for 20-30 seconds. Stir thoroughly for 1 to 2 minutes until you achieve a smooth, lump-free, cream-like consistency. (Whisk slowly in clock-wise direction)
4. THE POUR – Pour the mixture slowly into the lowest part of your silicone mold. Let the liquid push the air up and out. Gently tap the sides of your mold for 30 seconds to force any hidden micro-bubbles to the surface. (Pro-Tip: If you experience bubbles, you can spray isopropyl alcohol on the mould before pouring the mixture.)
5. CURE & DEMOLD – Working Time: You have 3-5 minutes to pour before it begins to set. – Demolding: Safe to demold in 45-60 minutes (depending on room temperature and mold thickness). – Maximum Strength: Allow 24 to 48 hours for a complete, rock-solid cure. – Do not put in direct sunlight & avoid mixing in big quantities due to faster setting time.
Professional-Grade Casting in 5 Simple Steps.
1. GEAR UP (SAFETY FIRST) – This is a high-strength composite. Always work in a well-ventilated area. Wear a dust mask to avoid inhaling fine particles and use standard crafting gloves (optional).
2. THE PERFECT RATIO – Always measure by weight & not by volume. Use a digital scale. – Standard Mix: 90g Powder to 50ml – 60ml Water. If you don’t have a digital scale, measure it by 3:2 (3 cups powder & 2 cups water.) (Pro-Tip: Add a few drops of water if you need a thinner flow, but do not overwater or you will ruin the structural strength).
3. MIX LIKE A PRO – Always add the powder into the water (not water into powder). Rest it for 20-30 seconds. Stir thoroughly for 1 to 2 minutes until you achieve a smooth, lump-free, cream-like consistency. (Whisk slowly in clock-wise direction)
4. THE POUR – Pour the mixture slowly into the lowest part of your silicone mold. Let the liquid push the air up and out. Gently tap the sides of your mold for 30 seconds to force any hidden micro-bubbles to the surface. (Pro-Tip: If you experience bubbles, you can spray isopropyl alcohol on the mould before pouring the mixture.)
5. CURE & DEMOLD – Working Time: You have 3-5 minutes to pour before it begins to set. – Demolding: Safe to demold in 45-60 minutes (depending on room temperature and mold thickness). – Maximum Strength: Allow 24 to 48 hours for a complete, rock-solid cure. – Do not put in direct sunlight & avoid mixing in big quantities due to faster setting time.
Titan Rock Casting Powder: Casting in 5 Easy Steps
1. GEAR UP (SAFETY FIRST) – This is a high-strength composite. Always work in a well-ventilated area. Wear a dust mask to avoid inhaling fine particles and use standard crafting gloves (optional).
2. THE PERFECT RATIO – Always measure by weight & not by volume. Use a digital scale. – Standard Mix: 90g Powder to 30ml Water. If you don’t have a digital scale, measure it by 3:1 (3 cups powder & 1 cup water.) (Pro-Tip: Add a few drops of water if you need a thinner flow, but do not overwater or you will ruin the structural strength).
3. MIX LIKE A PRO – Always add the powder into the water (not water into powder). Rest it for 20-30 seconds. Stir for 1 to 2 mins until you achieve a smooth, lump-free, cream-like consistency. – Mixture may feel hard at start but mixing it for a few mins will settle its consistency. (Whisk slowly in clock-wise direction)
4. THE POUR – Pour the mixture slowly into the lowest part of your silicone mold. Let the liquid push the air up and out. Gently tap the sides of your mold for 30 seconds to force any hidden micro-bubbles to the surface. (Pro-Tip: If you experience bubbles, you can spray isopropyl alcohol on the mould before pouring the mixture.)
5. CURE & DEMOLD – Working Time: You have 5-7 minutes to pour before it begins to set. – Demolding: Safe to demold in 45-60 minutes (depending on room temperature and mold thickness). – Allow 24 to 48 hours for a complete, rock-solid cure. – Do not put in direct sunlight & avoid mixing in big quantities due to faster setting time.
Universal Pro-Tips & Best PracticesMaster the mix and perfect your pour.
Pour the mixture slowly into the lowest part of the silicone mold so the liquid pushes the air up and out.
Gently tap the sides of your mold for 30 seconds to force any hidden micro-bubbles to the surface.
Spray isopropyl alcohol on the mold before pouring the mixture to prevent or eliminate bubbles.
Add a few drops of water if a thinner flow is needed, but avoid overwatering to maintain structural strength.
Always add the powder into the water rather than pouring water into the powder.
Measure the ingredients by weight using a digital scale instead of relying on volume.
Keep curing molds out of direct sunlight.
Avoid mixing large quantities at once to prevent the mixture from setting too fast.